How to reset or recalibrate Omnidesk Essential?

How to reset or recalibrate Omnidesk Essential? <iframe allowfullscreen frameborder="0" height="315" src="//www.youtube-nocookie.com/embed/pn3oKFm5Hrg" width="560"></iframe>

Omnidesk Essential

Misalignment of desk frame while assembly?Firstly, try to loosen out the three screws that are screwed onto the frame. Try securing the screw into the hole that you are having issue with aligning it.When the screws are tightened too much, it may caus

<ul class="sc-eAKXzc jMPzSu pf-cff700c3" data-pf-type="List">
<li class="sc-iNhVCk fGSPbe pf-c2e76bdd" data-pf-type="List.Item">Misalignment&#xA0;of desk frame while assembly? Firstly, try to loosen out the three screws that are screwed onto the frame. Try securing the screw into the hole that you are having issue with aligning it. When the screws are tightened too much, it may cause the misalignment for the frame. You will be required to ensure that the screws are properly placed into the screw treading. While using the tools to secure the screw, please kindly note that it has to be screwed straight in. The slanting of screws during installation may cause damage the treading. If there are still uncertainties or any issues faced, please feel free to contact us at&#xA0;sales@theomnidesk.com&#xA0;and we&apos;ll try our best resolve your issues! </li>
<li class="sc-iNhVCk fGSPbe pf-7949815c" data-pf-type="List.Item">Does the static desk assembly requires any drilling? It will be required to manually drill one hole for securing the tabletop to the middle desk frame. (Do not remove rubber stopper for the middle desk frame) Drilling will also be required if you are getting accessories like PC Mount , Mounted Powerbar and Sub woofer mount. * It is recommended that any required holes need for fasteners be pre-drilled if the desktop is not predrilled. Do not use Countersunk Screws. * Double-check that the wood screws are not too long for your desktop to avoid puncturing the surface when they are screwed all the way in. </li>
<li class="sc-iNhVCk fGSPbe pf-e9dfb81c" data-pf-type="List.Item">Can static desk be upgraded to an adjustable desk without changing the desk frame? No, you will be required to change the desk frame to the height adjustable version as our static desk frame is non modular and it is not able to support direct upgrades.</li>
</ul>

Omnidesk Zero Static (2018 Model)

How to Reset My Omnidesk Zero Electric (2018 Model) ?. Troubleshooting Common Issues:. If the LED display shows "HOT", let the motor cool down for 20 minutes.If the LED display shows an error message L05 or ("ER1" - "ER13"), ensure that all your wire

How to Reset My Omnidesk Zero Electric (2018 Model) ?
<ul class="sc-eAKXzc jMPzSu pf-4fba5f5d" data-pf-type="List">
<li class="sc-iNhVCk fGSPbe pf-876a31fa" data-pf-type="List.Item">Press&#xA0;and&#xA0;hold&#xA0;the&#xA0;DOWN button&#xA0;until the desk reaches the lowest height.</li>
<li class="sc-iNhVCk fGSPbe pf-66bb63b5" data-pf-type="List.Item">Release&#xA0;the DOWN button</li>
<li class="sc-iNhVCk fGSPbe pf-4e0f72d8" data-pf-type="List.Item">Press&#xA0;and&#xA0;hold&#xA0;the&#xA0;DOWN button&#xA0;again till the LED display reads &quot;RST&quot;</li>
<li class="sc-iNhVCk fGSPbe pf-119b5293" data-pf-type="List.Item">Release&#xA0;the DOWN button</li>
<li class="sc-iNhVCk fGSPbe pf-155fca4e" data-pf-type="List.Item">Press&#xA0;and&#xA0;hold&#xA0;the&#xA0;DOWN button&#xA0;again until the desk lowers a little bit more, slightly rises and stops.</li>
<li class="sc-iNhVCk fGSPbe pf-b9a687c2" data-pf-type="List.Item">Release&#xA0;the DOWN button. Your desk is now ready to use. <iframe allowfullscreen frameborder="0" height="315" src="//www.youtube-nocookie.com/embed/dskUhn25hgY" width="560"></iframe> </li>
</ul>
Troubleshooting Common Issues:
If the LED display shows &quot;HOT&quot;, let the motor cool down for 20 minutes. If the LED display shows an error message&#xA0;L05&#xA0;or (&quot;ER1&quot; - &quot;ER13&quot;), ensure that all your wired connections are secure. Some common error naming: 1) RST(ASR) 2) E01 / E02 / E07 / E08 3) LOS All your wired connections should include: 1. Legs to Legs 2. Legs to Handset&#xA0; 3. Control Box(Black box) to Legs 4. Power Cable to Control Box(Black Box) If there are still uncertainties or issues faced, please feel free to contact us at&#xA0;sales@theomnidesk.com&#xA0;and we&apos;ll try our best resolve your issues!

Omnidesk Zero Electric (2018 Model)

Before Operating, Please Take Note:. It is highly recommended to RESET the desk prior to use. How to Reset My Omnidesk Ascent/Classic or Pro?. If your desk is not functioning properly, you may need to perform the reset. How to Customize The Memory Pr

Before Operating, Please Take Note:
<ul class="sc-eAKXzc jMPzSu pf-96ddbc82" data-pf-type="List">
<li class="sc-iNhVCk fGSPbe pf-aea066de" data-pf-type="List.Item">Make sure no obstacles are in the desk&apos;s path.</li>
<li class="sc-iNhVCk fGSPbe pf-a2b4744c" data-pf-type="List.Item">Make sure that the desktop is not touching any walls.</li>
<li class="sc-iNhVCk fGSPbe pf-b53c5aed" data-pf-type="List.Item">Make sure all cords are of appropriate length to accommodate the change in height.</li>
</ul>
It is highly recommended to&#xA0;RESET&#xA0;the desk prior to use. 
How to Reset My Omnidesk Ascent/Classic or Pro?
<ul class="sc-eAKXzc jMPzSu pf-6483bbd5" data-pf-type="List">
<li class="sc-iNhVCk fGSPbe pf-c8834942" data-pf-type="List.Item">
(Desk with &quot;Error:&#xA0;E01 / E02 / E07 / E08&quot;) Press and hold the DOWN button for about 7 Second until it show&#xA0;&quot;RST(ASR)&quot; 
</li>
<li class="sc-iNhVCk fGSPbe pf-c8834942" data-pf-type="List.Item">Once the desk is at &quot;RST(ASR)&quot;, press&#xA0;and&#xA0;hold&#xA0;the&#xA0;DOWN button&#xA0;until the desk reaches the lowest height.</li>
<li class="sc-iNhVCk fGSPbe pf-fc258f70" data-pf-type="List.Item">Release&#xA0;the DOWN button</li>
<li class="sc-iNhVCk fGSPbe pf-e9f69e7c" data-pf-type="List.Item">Press&#xA0;and&#xA0;hold&#xA0;the&#xA0;DOWN button&#xA0;again till the LED display reads &quot;RST(ASR)&quot;</li>
<li class="sc-iNhVCk fGSPbe pf-bb62dde9" data-pf-type="List.Item">Release&#xA0;the DOWN button</li>
<li class="sc-iNhVCk fGSPbe pf-cb2eb8d2" data-pf-type="List.Item">Press&#xA0;and&#xA0;hold&#xA0;the&#xA0;DOWN button&#xA0;again until the desk lowers a little bit more, slightly rises and stops.</li>
<li class="sc-iNhVCk fGSPbe pf-fa7b5fdd" data-pf-type="List.Item">Release&#xA0;the DOWN button. Your desk is now ready to use.</li>
</ul>
If your desk is not functioning properly, you may need to perform the reset. <iframe allowfullscreen frameborder="0" height="315" src="//www.youtube-nocookie.com/embed/ZDgfR6IZsig" width="560"></iframe> 
&#xA0;
How to Customize The Memory Presets?
Use the UP/DOWN button to find a desired height, then press &#x201C;M&#x201D; followed by the number 1-4.
How to use the Handset Lock(Child Lock)? 
To lock the handset: Press&#xA0;and&#xA0;hold&#xA0;the &#x201C;M&#x201D; button (about 8 seconds) until the LED display switches to &#x201C;S-&#x201C; and then to &#x201C;LOC&#x201D;. Release the button. To unlock the handset: Press&#xA0;and&#xA0;hold&#xA0;the &#x201C;M&#x201D; button (about 8 seconds) until the LED switches from &#x201C;LOC&#x201D; to the height display. Release the button.
Set the Height That is Shown on The LED Display?
<ul class="sc-eAKXzc jMPzSu pf-15146989" data-pf-type="List">
<li class="sc-iNhVCk fGSPbe pf-2b7b21fa" data-pf-type="List.Item">Hold&#xA0;the&#xA0;DOWN button&#xA0;until the desk reaches the lowest height.</li>
<li class="sc-iNhVCk fGSPbe pf-4bc74695" data-pf-type="List.Item">Release&#xA0;the DOWN button</li>
<li class="sc-iNhVCk fGSPbe pf-afe5065f" data-pf-type="List.Item">Measure the distance from your floor to the top surface of the desk. If the number on the LED display&#xA0;does NOT&#xA0;match your measurement, you can change the number following&#xA0;these steps:</li>
</ul>
<ul class="sc-eAKXzc jMPzSu pf-0ee92797" data-pf-type="List">
<li class="sc-iNhVCk fGSPbe pf-a3824f7c" data-pf-type="List.Item">Press&#xA0;and&#xA0;hold&#xA0;the&#xA0;DOWN&#xA0;button again till the LED display reads &quot;RST(ASR)&quot;</li>
<li class="sc-iNhVCk fGSPbe pf-fd8a6bc5" data-pf-type="List.Item">Press&#xA0;and&#xA0;hold&#xA0;the &quot;M&quot; button (for about 5 seconds) till the LED number display is&#xA0;blinking.&#xA0; </li>
<li class="sc-iNhVCk fGSPbe pf-6c6d1ba1" data-pf-type="List.Item">Use the&#xA0;up/down&#xA0;button to change the value of the starting height till it matches your measurement. </li>
<li class="sc-iNhVCk fGSPbe pf-289e44d4" data-pf-type="List.Item">Wait about 5 seconds until the display return to &quot;RST(ASR)&quot;</li>
<li class="sc-iNhVCk fGSPbe pf-80eaa444" data-pf-type="List.Item">Finish the reset process by&#xA0;pressing&#xA0;and&#xA0;holding&#xA0;the&#xA0;DOWN&#xA0;button again until the desk lowers a little bit more, slightly rises and stops. Then&#xA0;release&#xA0;the button.</li>
</ul>
Set the Height Upper and Lower Limits?
Make sure the power is&#xA0;ON&#xA0;and a number reads in the LED display (if no number appears, please follow the&#xA0;Troubleshooting&#xA0;method below)
<ul class="sc-eAKXzc jMPzSu pf-23d7c979" data-pf-type="List">
<li class="sc-iNhVCk fGSPbe pf-83900404" data-pf-type="List.Item">To Set the Upper-Limit Position: Use the&#xA0;UP/DOWN&#xA0;Buttons to move the base to the desired&#xA0;maximum-height position. Press the &#x201C;M&#x201D; button and release.&#xA0;Press&#xA0;the&#xA0;UP&#xA0;button and release. The LED display will flash &#x201C;S-&#x201C;.&#xA0;Press&#xA0;and&#xA0;hold&#xA0;the &#x201C;M&#x201D; button (about 2 seconds) until the LED display changes to &#x201C;999&#x201D;. The display will automatically return to the selected height. The new upper limit is now set.</li>
<li class="sc-iNhVCk fGSPbe pf-15779984" data-pf-type="List.Item">To Remove the Upper/Lower Limit Positions: Press&#xA0;and&#xA0;hold&#xA0;the &#x201C;M&#x201D; button until the LED&#xA0;display flashes &#x201C;S-&#x201C; and then release it. Within 5 seconds, press the &#x201C;M&#x201D; button again and&#xA0;hold&#xA0;for 2 seconds. The LED display will change to &#x201C;555&#x201D; and then automatically return to the height display. The upper and lower limits are now removed.</li>
</ul>
Troubleshooting Common Issues:
If the LED display shows &quot;HOT&quot;, let the motor cool down for 20 minutes. If the LED display shows an error message (&quot;ER1&quot; - &quot;ER13&quot;), ensure that all your wired connections are secure. Some common error naming: 1) RST(ASR) 2) E01 / E02 / E07 / E08 All your wired connections should include: 1. Legs to control box for both sides (Including extension cable) 2. Control box to control handset 3. Power cable for the control box If there are still uncertainties or issues faced, please feel free to contact us at&#xA0;sales@theomnidesk.com&#xA0;and we&apos;ll try our best resolve your issues!

Troubleshooting Guide

Omnidesk Essential

Omnidesk Zero Static (2018 Model)

Omnidesk Zero Electric (2018 Model)

Ascent / Classic / Pro — Common Issues & Solutions