Welcome to the ultimate seating experience with the Omnidesk Embrace Pro Ergonomic Chair. Designed for maximum comfort and support, our chair ensures you maintain proper posture and reduce strain during long hours of work or leisure. Follow this guid

Welcome to the ultimate seating experience with the Omnidesk Embrace Pro Ergonomic Chair. Designed for maximum comfort and support, our chair ensures you maintain proper posture and reduce strain during long hours of work or leisure. Follow this guide to get the most out of your Embrace Pro Ergonomic Chair.
<iframe allowfullscreen frameborder="0" height="315" src="//www.youtube-nocookie.com/embed/kmDaw9U6ZGc" width="560"></iframe>

How to use your Embrace Pro Ergonomic Chair?

Before operating the table please take note:. 1) Make sure no obstacles are in the desk’s path.2) Make sure that the desktop is not touching the walls.3) Make sure all cords are appropriate length to accommodate the change in height. It is highly rec

Before operating the table please take note:
1) Make sure no obstacles are in the desk&#x2019;s path. 2) Make sure that the desktop is not touching the walls. 3) Make sure all cords are appropriate length to accommodate the change in height.
It is highly recommended to RESET the desk prior to use.
Optional RGB Lighting can be controlled by downloading the app. Questions: How to Reset the Desk(Troubleshooting)? If your desk is not functioning properly, you may need to perform the reset as below: 1) Press and hold the DOWN button until the desk reaches the lowest height. 2) Release the DOWN button. 3) Press and hold the DOWN button again until the LED display reads &#x201C;RST&#x201D;. 4) Release the DOWN button. 5) Press and hold the down button again until the desk lowers a little bit more, slightly rises and stops. 6) Release the DOWN button. Your desk is now ready to use. How to do memory&#xA0;Pre-sets? Use the UP/DOWN button to find a desired height, then press &#x201C;M&#x201D; followed by the number 1-4. How to set the height that is shown on the LED display? Press the DOWN button until the desk reaches the lowest height. Release the DOWN button. Measure the distance from your floor to the top surface of the desk. If the number on the LED display does NOT match your measurement. You can change this number following these steps.
1) Press and hold DOWN button until the LED display shows &#x201C;RST&#x201D;. 2) Press and hold the &#x201C;M&#x201D; button (about 5 seconds) until the LED displays shows the blinking height. 3) Use the UP/DOWN button to change the value of the starting height till it matches your measurement. 4) Wait about 5 seconds until the display return to &#x201C;RST&#x201D;. 5) Finish the reset process by pressing and holding the DOWN button again until the desk lowers a little bit more, slightly rises and stops. Release the button.
What is the common issue of the desk? If the LED display shows &#x201C;HOT&#x201D;, let the motor cool down for 20minutes. If the LED display shows an error message (&#x201C;Er1&#x201D;- &#x201C;Er13&#x201D;), ensure that all your wired connections is secure. All your wired connections should include: 1) Legs to control box for both sides 2) Control box to control handset 3) Power cable for the control box
If there are still uncertainties or issues faced, please feel free to contact us at&#xA0;<a href="mailto:sales@theomnidesk.com?subject=Troubleshooting%20Queries">sales@theomnidesk.com</a>&#xA0;and we&apos;ll try our best resolve your issues!

Important Notes Before Using Omnidesk

Contact us through a specially prepared form

theomnidesk

Usage Guide

Troubleshooting

Complete Guide to Omnidesk Desks & Tabletops

Difference between Omnidesk Ascent & Pro

Omnidesk Tabletop Material

Omnidesk Zero - Static Gaming Desk

About Omnidesk

Payment Options

Instalments Plan

Payment Enquiry

Omnidesk Showroom (Suntec City)

Omnidesk Showroom (Funan Mall)

Experience Studio

Warranty Extension Redemption

Promotions

Omnidesk Rewards - FAQ

Omnidesk Rewards - How to Enroll

Omnidesk Rewards

Purchasing Query

Changing my order after purchase

Cancelling of my Omnidesk order

Order Enquiry

Inspecting shipment for damage

Flat-pack Delivery

Upgrading your Omnidesk with new add-ons accessories

Delivery Timeline

Holding of Order

Delivery Arrangement

Lead time for orders (Back-order, Pre-order)

Lead time

Order & Delivery Enquiry

(Installation Guide) Omnidesk Classic

(Installation Guide) Omnidesk Ascent Radiance

(Installation Guide) Caturra

(Installation Guide) Omnidesk Essential

(Installation Guide) Omnidesk Ascent

How to use the Ascent controller?

Omnidesk Assembly

(Installation Guide) Omnidesk Zero - Static Gaming Desk

(Installation Guide) Omnidesk Pro

Omnidesk Assembly Guide

(Installation Guide) Arka Desk Riser

(Installation Guide) Loft - Headrest

(Installation Guide) Loft

Empower - Mounted Powerbar (Extension Cord)

(Installation Guide) Keep Lite Desk Drawer

(Installation Guide) Embrace Pro - Cushion

(Installation Guide) Embrace Pro - Mesh

Keep - Desk Drawer

Castors

(Installation Guide) Omnidesk Switch Pro

Cable Management Bar

Monitor Arm/Laptop Mount

PC Mount

Accessory Assembly Guide

(Installation Guide) Cololight Pro and Cololight Strip - Android Apps

Apps Guide

Setup and Assembly

Warranty Coverage

Return and Refund Policy

Warranty

Care procedure for Signature Powder Coated Series

Care procedure for WildWood, Wildwood+, Ichi Collection and ECO Bamboo Series

Care Procedure

Omnidesk Essential

Omnidesk Zero Static (2018 Model)

Omnidesk Zero Electric (2018 Model)

Ascent / Classic / Pro — Common Issues & Solutions

Troubleshooting Guide